DECORATIVE CONCRETE RE-SURFACING & OVERLAYMENT

The process of “overlaying” your existing concrete slab with cement based polymer.
“Stamping Skins” can be laid on top of the overlay mixture to create a wide variety of textures. Integral colors as well as “acid stains” can be applied to create an almost endless variety of color.

The job below was completed on top of a very old concrete patio. “Slate skins” were used to provide texture, while brick red was used as a base color & charcoal gray release was used to highlight the depth of the texture. Following this, three different types of “acid stains” were used to add more depth and definition to the overlayment.

For further information on “Concrete Overlays” and “Concrete Stamping” please visit www.brickform.com

This is a company that manufactures materials and stamps used for this process.  Or Visit www.decorativeconcrete.network

 

Before	After
After	After
#1- Concrete Patio ( Surface paint must be removed)	#2 Substrate grinded/Cracks chased/Power Washed
#3 - Cracks Filled	#4 - Primer applied
#5—Cement Polymer overlay is mixed w/ Brick Red Integral color and spread out w/ a trowel at an exact depth of 3/8 inch.	#6—Charcoal Grey Release Agent is Applied to “concrete stamps” and patios so the stamps will not stick to the overlayment Release agent also acts as an accent color which you will notice below
#7 - A stencil is placed and saw cut.	#8—Three different types of acid stains re applied to give the patio three different shades of color Note: Acid stains cause a chemical reaction with the cement which cause a change in color

If you are looking for a professional landscaping company in the Closter/Old Tappan area, for any of your lawn care needs, please call us today at 201.391.9471 or complete our online request form.